Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems
$285.00
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment.
- Updated distinctive Zipp cosmetics
- Designed using SRAM Exogram technology
- New SL Speed Stem weighs just 123g (100mm)
- ±6° carbon stem
- Secure with four bolt faceplace using Torx T25 bolt heads
- Matte Black finish
- Lifetime warranty
- Zipp Quickview integrated mount available separately
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$59.99
FL1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar.
- Designed for mountain use
- Forged and machined AL2014 body
- 4-bolt face plate helps distribute clamping load
- Corrosion-resistant Torx T25 steel bolts
- Compatible with all 31.8 bars
- 1 1/8" steerer
- Includes stem top cap and bolt
- Lengths: 50-90mm
- Angle: 6° flip-flop
$59.99
- Adjustable top mounted threadless stream
- Adjustable from 0 to 60 degrees
- Available in two lengths
- Material: Alloy
$59.95
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Stem Angle: +17 degrees, -17 degrees
- S.H.I.S. Stem Clamp Diameter: 31.8mm
$49.95 - $52.95
Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance.
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Stem Angle: 30 degrees
- S.H.I.S. Stem Clamp Diameter: 28.6
$47.99 - $51.00
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
$36.99
MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards.
- Tested to ISO 4210 Mountain standards
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate for easy installation
$36.99
MSW 25° stems raise the bar—literally—for what riders can expect from an unassuming stem. Available in lengths from 60-110mm for custom fitting. Rigorously tested to ISO-4210 Mountain qualification standards.
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate for easy installation
- Bead blasted & anodized black finish
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
$29.99 - $36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
$35.00
Fully integrated.
A convenient mount on the stem securely holds SP-Connect compatible smartphone cases and adhesive mounts to put all of your data in an optimal position.
Where it thrives:
The open road, leisurely rides, in town
What it's built for:
Compatibility, durability
Highlights:
- Compatible with SP Connect smartphone cases and adhesive mounts
- Integrated mount
- Range of sizes
$150.00
Waste not, want KNØT.
Part of the KNØT SystemBar, this aluminum stem helps save six watts over a traditional round handlebar. Not only that, you can adjust the bar position. Have cake. Eat cake.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, control
Highlights:
- One-piece looks, two-piece function
- Wind tunnel proven, hides cables
- Compatible with 2019+SuperSix EVO
$150.00
System = speed.
Paired with the SAVE or KNØT SystemBar, you end up with the speed and good looks of a one-piece system with the adjustability of a two-piece.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, efficiency
Highlights:
- Integrated computer mount
- Compatible with most bicycles
- One-piece looks, Two-piece function
$55.00
Descend with confidence.
The perfect match for any trail or enduro bike paired with the HollowGram SAVE Riser 35mm handlebar for increased descending prowess.
Where it thrives:
Challenging trails, down hills
What it's built for:
Control, confidence
Highlights:
- 35mm clamp size
- 37mm length
- 0° degrees rise
$55.00
The workhorse.
Whether you're upgrading your stock parts or looking for something a bit more eye catching, the alloy ONE stem delivers.
Where it thrives:
The open road, gravel roads, up and down hills
What it's built for:
Agility, control
Highlights:
- Lightweight aluminum construction
- Wide range of sizes
- Eye-catching and sleek design
$38.99
TruVativ's Stylo T20 stem is 3D forged for that perfect balance of light weight, stiffness and control on the trail. Four bolts securely attach the face plate and make changing out handlebars a breeze.
$54.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in.
- Forged and machined from 6061 aluminum
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body
- Stack Height: 42mm
$79.99
The Koryak Di2 stem is ideal for AM, Trail, and XC. It's 3D forged with AL-7075 aluminum for a strong and lightweight stem, and has a headlock system for a secure front clamp fixation. The Koryak stem is ready to hit the trail.
$29.99 - $32.00
Dimension 26.0 Stems
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Fully forged AL-6061-T6
- 4-bolt handlebar clamp
- Weight: 140g-180g
$100.00 - $110.00
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate.
- Aluminum stem with 40mm stack height
- Single M6 bolt clamps stem to fork steerer
- T25 bolts on bar clamp
- 120 grams for 110mm
- Bar Clamp Diameter: 31.8 mm
- S.H.I.S. Stem Clamp Diameter: 28.6mm
- Weight: 120 grams (110mm)
Page 1 of 1